So this isnt my first thread about my 2008 5.7 QC 4x4 having 4x4 isues. Back in January of 2011 I did a road trip to the great state of Texas with some buddies, AWSOME time by the way....on that trip somehow the transfer case motor for the 4x4 died forcing my to drive from Texas to Canada in 4x4 auto....
I got home and had it fixed under warranty which helped a lot. so about 3 days ago we got a snow dump, i put the truck into 4x4 headed down to Lowes for some supplied and when i pulled into the parking lot BAM this huge power surge and warning bells and lights and then the truck dies. I headed into the store, got the supplies fired the truck back up no issues took it out of 4x4 back to 2wd and headed home.
So today drove into some snow on my front lawn about 7inches worth.....put the truck into 4x4 and BAM power surge.....noises....bells.....flashing. Now im not able to get the truck out of 4x4.....i finally got the truck off the front lawn, up the drive.....i truned it off and then nothing.....truck wouldnt trun over nothing. So i messed with it for a bit moving between 4auto and 4lock and finally got it to turn over. So as it stands the truck might start with some fiddling with the 4x4 knob and ignition, it will not engage back to 2wd and i have thrown codes: C140D (transfercase motor) same as 2011, B2184 (ignition unlock runstart control circut low) and U0024 (can B bus circut open). I managed to get it to the dealership and hopefully they have something for me in the AM......God i hope this is a warranty issue.....again. Any thoughts would be helpful, its my daily vehicle.
-William
I got home and had it fixed under warranty which helped a lot. so about 3 days ago we got a snow dump, i put the truck into 4x4 headed down to Lowes for some supplied and when i pulled into the parking lot BAM this huge power surge and warning bells and lights and then the truck dies. I headed into the store, got the supplies fired the truck back up no issues took it out of 4x4 back to 2wd and headed home.
So today drove into some snow on my front lawn about 7inches worth.....put the truck into 4x4 and BAM power surge.....noises....bells.....flashing. Now im not able to get the truck out of 4x4.....i finally got the truck off the front lawn, up the drive.....i truned it off and then nothing.....truck wouldnt trun over nothing. So i messed with it for a bit moving between 4auto and 4lock and finally got it to turn over. So as it stands the truck might start with some fiddling with the 4x4 knob and ignition, it will not engage back to 2wd and i have thrown codes: C140D (transfercase motor) same as 2011, B2184 (ignition unlock runstart control circut low) and U0024 (can B bus circut open). I managed to get it to the dealership and hopefully they have something for me in the AM......God i hope this is a warranty issue.....again. Any thoughts would be helpful, its my daily vehicle.
-William
