DodgeTalk Forum banner
Status
Not open for further replies.
1 - 16 of 16 Posts

·
HemiSS/T
Joined
·
609 Posts
Discussion Starter · #1 ·
I was just looking around on ebay and found these. They're a legitimate wheel company but the seller only has a 95% positive feedback so I'm a little weary. Give me your opinions. Oh yea and I'm wanting to use these when I do my 4/6 drop with 295/30/22's. They only have a +15mm offset so let me know if they are even a possibility.

http://cgi.ebay.com/ebaymotors/RVM-...3QQihZ011QQcategoryZ43960QQrdZ1QQcmdZViewItem
 

·
Registered
Joined
·
905 Posts
The offset is wrong. For a 4/6 with 22's you'll need at least 24 mm offset like the SRT-10 wheels or like the KMC ss in a 24". You could get away with a 20 mm offset, but you'll need to do alot of custom work for the 22's to fit. Good luck
 

·
HemiSS/T
Joined
·
609 Posts
Discussion Starter · #3 ·
Do you know for sure that they offer the KMC SS in our bolt pattern with the +38mm offset that they list in the wheel description?
 

·
Registered
Joined
·
716 Posts
04_on_22s said:
The offset is wrong. For a 4/6 with 22's you'll need at least 24 mm offset like the SRT-10 wheels or like the KMC ss in a 24". You could get away with a 20 mm offset, but you'll need to do alot of custom work for the 22's to fit. Good luck
I agree. With a 4/6 drop I'd really want a +25mm offset with a 22 X 10 inch wheel. With only +15mm offset your chances of rubbing are a fair amount greater than with a +25mm offest.

Great price tho ($750 shipped). If I was you I'd continue shopping...
 

·
Registered
Joined
·
905 Posts
Great looking truck lowhemi! How do you like the SRT-10 wheels? I have the KMC SS wheels in a 22' and have been thinking about getting those same wheels, but in the replica chrome.
 

·
HemiSS/T
Joined
·
609 Posts
Discussion Starter · #7 ·
hey 04 on 22's what are the backspacing options for those kmc ss wheels?
 

·
Registered
Joined
·
716 Posts
04_on_22s said:
Great looking truck lowhemi! How do you like the SRT-10 wheels? I have the KMC SS wheels in a 22' and have been thinking about getting those same wheels, but in the replica chrome.
Thanks for the compliment. The wheels have been perfect! No vibrations whatsoever at any speeds. The tire wheel combo has stayed perfectly balanced from day one. Previously, several 20's and 22's would not stay balanced. I don't know if it was the tires or wheels but These replicas and Toyo tires have been perfect. I wanted the chrome as well but it was a additional $800. I paid 1750 mounted and balanced out the door from a local Dodge dealer. I am very pleased!!!
 

·
Registered
Joined
·
905 Posts
My 22's are a +18 mm offset. At the moment, they are about a 1/2 inch past the body line so I couldn't bag my truck on these wheels without shortening my rear axle or bring in the front control arms. The 24's are the only ones they offer in a +24 mm offset and those you can tuck without much work or get a 4/6 without any headaches. If your just gonna go with a 4/6, you can get away with a +20 mm wheel but your gonna have to get a much smaller diameter tire. Slammed 1 is a pro at this, he can answer any question you may have about this. Good luck.
 

·
Registered
Joined
·
905 Posts
Wow, 1750...is that wheels and tires? Man, I paid over 3200 for my Geolanders and wheels from Americas Tire! I've see the chrome replicas on ebay for 1100 and am quite tempted. KMC is sending me a brand new set of the SS's this Friday. Some jerk at the local car wash put precleaner on my wheels right as I got there and didn't let my wheels cool before he sprayed them. So the dish became slightly fogged. I took it to them and with no hassle got me a new set ordered. I am thinking about trading these wheels with someone who has new SRT's or just sell 'em.
 

·
Registered
Joined
·
716 Posts
Watch out! A lot of the cheaper SRT-10 replicas are less than 10 inches wide.
 

·
Registered
Joined
·
339 Posts
i know for a fact that the 24" kmc ss comes in a +25 offset they are 24x10 w/ 295/35/24 coopers
 

Attachments

·
Registered
Joined
·
339 Posts
22's come in a +20 they are 9.5 wide so they would work fine , i had boss 304's 9.5 wide w/ +20 & i think my 24's sit like 1mm out more so they are basically the same
 

·
Registered
Joined
·
905 Posts
Unfortunatly the 22 KMC are only +18 and there is no way I can tuck mine. I shoulda went with 24's like se7en. By the way, that is one sweet a$$ truck.
 

·
Registered
Joined
·
339 Posts
thanks for the compliment im just getting started just wait
 
1 - 16 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Status
Not open for further replies.
Top