DodgeTalk Forum banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
1,315 Posts
Discussion Starter #1
Im just wanting some feedback from people that have an aeroforce guage with the aeroforce wideband hooked up to it and what are your thoughts on it. Is it quality, accurate, how hard to hook up, etc etc. Are the readings dislpayed on the guage on just the top or bottom so i can also have the RPM reading at the same time?
 

·
Tricked out Ram
Joined
·
12,635 Posts
I can tell you it is not hard to hook up as the Aeroforce it PnP via OBD port. The WB is only a few wires at most. But keep in mind the Aeroforce will not datalog to a computer or SD card. The cheapest WB setup out there is the Innovate LC-1
 

·
Registered
Joined
·
1,315 Posts
Discussion Starter #3
do they make srt10 dual gauge pods for the A pillar? because that would be great if they did then i can get that innovative wideband guage too, other wise i will have to find a place to put another guage.
 

·
Admin - David Mack
Joined
·
30,924 Posts

Attachments

1 - 5 of 5 Posts
Status
Not open for further replies.
Top