DodgeTalk Forum banner
Status
Not open for further replies.

wheels

1K views 7 replies 4 participants last post by  MonsoonMike 
#1 ·
so i have m/t classic II 17x9 with a 4.5 backspacing and -12 offset. procomp have black steel wheels i like 17x9 with a 4.25 backspacing and a -19 offset. will these stick out a lot more then the m/t that i have stupid question. if so how much? i cant find any charts online that will show me how this will look.
 
#2 ·
With out doing the exact math, the new wheels would stick out farther by about a 1/4" or so.
 
#4 ·
My math show .025 difference nothing....
 
#6 ·
Let see if I can get this right...

Measured from the hub flange:
4.25 with -19mm (.748") outter edge is 4.980"
4.5 with -12mm (.472") outter edge is 4.972

Difference of .008, little more than a hair
 
#7 ·
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top