DodgeTalk Forum banner

Status
Not open for further replies.
1 - 8 of 8 Posts

·
Registered
Joined
·
2,168 Posts
Discussion Starter #1
so i have m/t classic II 17x9 with a 4.5 backspacing and -12 offset. procomp have black steel wheels i like 17x9 with a 4.25 backspacing and a -19 offset. will these stick out a lot more then the m/t that i have stupid question. if so how much? i cant find any charts online that will show me how this will look.
 

·
Previously Micash21
Joined
·
2,802 Posts
With out doing the exact math, the new wheels would stick out farther by about a 1/4" or so.
 

·
Redtruck-VA
Joined
·
2,758 Posts
My math show .025 difference nothing....
 

·
Redtruck-VA
Joined
·
2,758 Posts
Let see if I can get this right...

Measured from the hub flange:
4.25 with -19mm (.748") outter edge is 4.980"
4.5 with -12mm (.472") outter edge is 4.972

Difference of .008, little more than a hair
 

·
Previously Micash21
Joined
·
2,802 Posts
1 - 8 of 8 Posts
Status
Not open for further replies.
Top