DodgeTalk Forum banner
Status
Not open for further replies.
1 - 20 of 78 Posts

·
11 sec club
Joined
·
6,067 Posts
Discussion Starter · #1 · (Edited)
Ok so after talking to gadier I'm going to run bigger tires on my 4/6 drop. He has 305/50/20's & runs them w/ no problem. I do not want to run the 275/45's. I'm going to try to run my 285/50's on the rear & 265/50's on the front. I DONT CARE IF I DESTROY THE WHOLE TRUCK! I DO NOT WANT THOSE RUBBERBANDS ON MY TRUCK!!! lol Whats the best way to trim the fenders? Adam? lol
 

·
Banned
Joined
·
6,990 Posts
Slammed1 had a little air-powered mini sawsall type cutter that worked like a charm. You could also use a cutoff wheel.
Get under the truck with the wheels off, find all the spot welds in the fender lip, draw a line with magic marker through the CENTER of each of them, and cut on that line, leaving half of each pinch weld there.
 

·
11 sec club
Joined
·
6,067 Posts
Discussion Starter · #3 ·
ok. What do ya do to keep the paint from chipping?
 

·
11 sec club
Joined
·
6,067 Posts
Discussion Starter · #5 ·
Ok. I cant remember, would a 265/50 fit under the front on a 4/6 if the offset is right w/o having to remove stuff?
 

·
Power Wagon #1605
Joined
·
16,086 Posts
make up your damn mind Gary:SPIN:
 

·
11 sec club
Joined
·
6,067 Posts
Discussion Starter · #8 ·
make up your damn mind Gary:SPIN:
Hey hey hey I dont need any lip out of you. Just get my caltrac base piece & shut your mouth lol jj. You are 2x's the size of me & like 12 years older than me. Dont hurt me
 

·
Power Wagon #1605
Joined
·
16,086 Posts
Hey hey hey I dont need any lip out of you. Just get my caltrac base piece & shut your mouth lol jj. You are 2x's the size & like 12 years older than me. Dont hurt me
I could squash you and your truck like a bug;D

Reason I asked, what size tires do you want me to get a price on?
 

·
Power Wagon #1605
Joined
·
16,086 Posts
I cant say for sure, but it should.
When I had my old wheels and 285/50's with a 3/5 drop, I had rubbing issues on the front.

Those are the wheels that Demon now has.
 

·
11 sec club
Joined
·
6,067 Posts
Discussion Starter · #12 ·
I could squash you and your truck like a bug;D

Reason I asked, what size tires do you want me to get a price on?
I dont even know. I have changed my mind so many times I have confused my ownself lol
 

·
11 sec club
Joined
·
6,067 Posts
Discussion Starter · #13 ·
When I had my old wheels and 285/50's with a 3/5 drop, I had rubbing issues on the front.

Those are the wheels that Demon now has.
Hmmmm. The 265/50's are a little smaller than the 285/50's but you do bring up a good point so idk
 

·
Power Wagon #1605
Joined
·
16,086 Posts
I still think you should do the 295 45 20 out back and 265 50 up front. The 285 50 is alot of tire to stuff out back....
Actually I didnt have any problems in the rear with that tire and a 3/5 drop, even while towing a 24' boat
 

·
11 sec club
Joined
·
6,067 Posts
Discussion Starter · #17 ·
All I know is I love my 285/50's lol I just want a 4/6 w/ decent size tires. Thats all. Is that too hard lol
 

·
Power Wagon #1605
Joined
·
16,086 Posts
All I know is I love my 285/50's lol I just want a 4/6 w/ decent size tires. Thats all. Is that too hard lol
Everything is hard when it comes to you Gary;D
 

·
Power Wagon #1605
Joined
·
16,086 Posts
1 - 20 of 78 Posts
Status
Not open for further replies.
Top