I didnt sand mine. 11 months later and no scratches. I used 2 coats of primer, 2 coats of metallic silver, and about 6 coats of clear acrylic enamel. If you feel weird about not sanding it, you could always buy some adhesion promoter.TigerfanHEMI said:Is any sanding required?.........Thanks
The part where the airbag switch is can be unscrewed and removed if I recall. So you should be fine.Shots said:I've actually been looking for a CHEAP radio bezel that I can try to paint to match. I have a RC (obviously from the pic), so when replacing that whole center piece I need to find one with the air bag switch in it.