guess dont know wtf iam saying then....if i would of looked alittle closer the arms dont extend passed the body mount....:ugh......then iam with spun......your frame mounts look diff for some reason???????
think i'm finaly done with the control arms. been riding around on the motomomentums from ebay for a while. love them though, had to fight the guy for the correct bolt collars. drilled all eight frame points to 9/16ths. what ever.
recently put on stickers
new tires in a few weeks
after i mount & balance the new 285 treads, you wount see much of the C-arms
here have a look
Hi, Pretty new here and to Ram. Out of the blue about 2 weeks ago my 99 started stalling and became undriveable for the day so I left it at work. Later that night I started it up and let in warm up so a co-worker could possibly follow me home in case it acted up again. After warming up for about...
I let the brake fluid level go too low so apparently a bit of air got into my brake lines. When I attempted to go to the farthest wheel (back drivers side) I encountered no bleed screw, ..I think. Please see photo below, where's that at?
(The plastic hose near the top is not attached and only...
2001 Sport, has run flawlessly for the 2 years I have had it, never stalled out once and always started on the first turn of the key - My luck has run out.
Started yesterday, was loosing coolant pretty badly on my way to work, managed to limp home thinking it was the waterpump, but it was the...
we were striping down a 1996 ram 1500 reg cab short box 360 auto 2wd. found this tag under the passenger side carpet riveted to the floor did a google search but cant find anything, if you know what this is or how I can decode it that would be great thanks.