DodgeTalk Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
55 Posts
Discussion Starter · #1 ·
I just had my BLACK ram buffed, and theres still water spots. Are they embeded in the clear coat? Is there anything to get them out??? Thanks
 

·
Registered
Joined
·
410 Posts
Yes it's possible that the spots are embedded in the paint but before you think of opting for a paint job, have you tried a clay bar on them? Other than a clay bar or a good chemical polish, I've done this before, but be careful, take some white distilled vinegar and cut it with water to a 50/50 solution, dampen a rag with the liquid and try rubbing an area somewhere it can't be seen first and try and get the spots out this way. You can go up to a 70/30 solution but again be careful. Don't let it sit on the paint too long, rinse it quickly.
Good luck, and let us know your results!
 

·
Registered
Joined
·
55 Posts
Discussion Starter · #3 ·
I just got it clay barred, and waxed. Im hesitant to do things like that, cuz theres no room for error. Just out of curiousity how much am i looking to have the truck re-cleared?
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top