DodgeTalk Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
240 Posts
Discussion Starter · #1 ·
I was going to do my crank seal today but, when i went to take the fan off i noticed that there were no bolts on the water pump pulley to grab onto, just 3? little holes. It looks like there is some sort of cover on the pulley. Is it a cover and if so how do i get it off? Also, the autoparts stores around here do not have a tool for the seal, so should i just use a screwdriver to pry it out?

Thanks
 

·
Registered
Joined
·
332 Posts
The fan has a large nut that bolts to the threads on the water pump pulley. You will need to hold the pulley somehow. I put duct tape around the pulley to prevent scratching and used a chain wrench around the pulley. The chain wrench looks like a pair of vise grips but has a chain on the end to grip large or irregular objects. Worked well for me.
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top