DodgeTalk Forum banner

Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I'm in the mechanical process of fixing up my 1988 w100. So far I've replaced the ujoints at the axles (and about to do the pinion side front/rear drive shaft ujoints), front brake lines/rotors/calipers, new drums/shoes, valve cover gaskets, plugs, battery, front/rear diff fluid, and gas tank grommet.

Now I'm wanting to tackle the suspension. Shocks are about rusted in half and in sure the 30yr old leaf springs are shot as well. Not to mention this thing is all over the road and has that driver side lean. Any ideas how to get rid of the lean or will new suspension fix this?

First question is, does anyone make like a 2-2.5" suspension lift for these trucks? The biggest selection I've found was skyjacker, but they only specify a 4/6/8 inch left for my truck. I did email them and they said I could use the D200bk and D200bks with D20 pitman arm and matching shocks to achieve this, but when I looked it up on their website there was no fitment guide.

Second, does anyone have a parts list for what I would need to replace any wear parts on the front end? Axle is a D44.

Lastly, how in the world do I fix the steering? I rebuilt the steering coupler with no avail and it still rides horrible. I'm just waiting to get pulled over for a suspected dui lol.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top