DodgeTalk Forum banner

Status
Not open for further replies.
1 - 8 of 8 Posts

·
Fastest stockblock 4x4 NA
Joined
·
2,695 Posts
Discussion Starter #1
Here a couple of video's from the track visit this weekend. Didn't get any of the faster runs, just a few of me trying different shifting techniques.

Also 2 video's of a ford lightning racing a Supercharged Dodge viper, owner of the SC Viper also has a Viper super snake at home.


http://www.youtube.com/watch?v=gKslrj2Lj6g

http://www.youtube.com/watch?v=kH_lK66-YqU

http://www.youtube.com/watch?v=8sc4I4XMfmI

http://www.youtube.com/watch?v=oYahKZoDB70

Ran consistant 13.1-2's Letting it shift by itself, then i tried manually shifting went to 13.3-5's. (went 1-2-N..... D.)

At the very end of the day i through on a ported throttle body i had (but didn't think it made much difference from using it at my 1/8 mile track) and a few other changes and made a few more passes which resulted in my best passes of the day.

Since my last previous best (8.38 1/8) i installed a summit underdive pulley and a taurus efan and put the Ported TB back on.

I am shifting out of third roughly 10-20 feet before the traps, so if i can find a tad taller tire (25.6 right now) i may pick up a little bit more time next season.

run down of my best slip

‎60 ft - 1.80
330 ft - 5.26
1/8 et - 8.23
1/8 mph - 81.5
1000' et - 10.81
1/4 et - 12.98
1/4 mph - 102
 

·
Fastest stockblock 4x4 NA
Joined
·
2,695 Posts
Discussion Starter #3
man that viper was having some issues. Quick runs though, Whats your setup?

2005 ram RC 4x4
Custom grind cam
Pace setter long tube headers
3000 Edge stall
Taurus efan
20% summit underdrive pulley
Mopar BV heads
hand Ported throttle body
Home made CAI for daily driving (headlight intake for track)

on street tires.
 

·
Toothy Critters Rock!
Joined
·
7,238 Posts
Nice runs. Looks a tad cold for street tires heck any tires for that matter. surprised I didn't see anyone do a john force burnout halfway down the track to warm it.
 

·
Registered
Joined
·
5,680 Posts
Nice runs Ruff. Glad to see you finally made it to a 1/4 track. Get yourself some 28" M&H DR's on all 4 corners which will keep you out of 4th going through the traps.
 

·
Jacob
Joined
·
2,294 Posts
2005 ram RC 4x4
Custom grind cam
Pace setter long tube headers
3000 Edge stall
Taurus efan
20% summit underdrive pulley
Mopar BV heads
hand Ported throttle body
Home made CAI for daily driving (headlight intake for track)

on street tires.
cool, thats quick for N/A. Didn't know Mopar made a set of BV's.
 

·
Valdez Racing Team
Joined
·
13,913 Posts
nice Andy, you didn't shift down to 2nd at 5k rpms to hold 3rd through the traps?
 

·
Fastest stockblock 4x4 NA
Joined
·
2,695 Posts
Discussion Starter #8
nice Andy, you didn't shift down to 2nd at 5k rpms to hold 3rd through the traps?
I know i was suppose to, but i am so used to running the 1/8 i kept on forgetting. lol
 
1 - 8 of 8 Posts
Status
Not open for further replies.
Top