DodgeTalk Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
bought new 2004 ram 1/2 ton v-6 with nv 3500 5 speed
upshift light not active,when i start gauge self test mode,
gauge clusters all show good,shift arrow lights up,
at the end of test it shows a c-code,
but still the upshift light will not work
 

·
Registered
Joined
·
10,637 Posts
Welcome to DT BigHorn1.....

You say it shows a C - Code... Are there any numbers behind it?

Also, Have you checked your relays and your fuse panel to see if you have a relay for the Shift light?

Obviously the fuse should be ok otherwise you wouldnt get a light during the Diag process...

Unfirtunately, I havent had many dealings with the shift light since I have the 5 speed auto in my rig...
 

·
Registered
Joined
·
122 Posts
my 04 V-6 with the nv3500 does not have a upshift light, far as I can tell. Where is this light supposed to be, becuase if I have one, it's never worked either!
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top