[98QuadCabV10]

Hey everyone,

I have a 98 ram 2500. Ball joints were worn out so I replaced all 4, and replaced shocks. After that I got an alignment. Now it seams like when I turn the wheel there is a delay then the truck turns. When I correct I have the same issue so I’m constantly going back and forth trying to keep it straight. All suspension parts are good. Any suggestions on what would cause this? I brought it back for an alignment and it still has the same problem.
Thanks.

 

[‘94 2500]

It could be a bad drive link bearing or arm. I replaced mine after my ball joints went out and it aligned and drove straight.