DodgeTalk Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Ok all, It seems I have broken my 5-45RFE tranny apparently the clutches burned or something. I'm being quoted at least $2,200.00 USD to replace frictions and steels and a new torque converter. No mind you this a steelership service department all with OEM parts. If I'm going to spend that much coin on it I would prefer to beef up the tranny. Any suggestion regarding parts, shops, mods or anything else. I'm also considering a new modded tranny or a maybe even a T56 conversion. I welcome everyone’s input on this the sooner the better. Thanks.
 

·
Registered
Joined
·
5 Posts
We have a clutch upgrade package that includes High energy frictions with Kolene® steels, increase torque capacity 30%. Increase clutch count in C-4, C-2 and overdrive clutch modules. Runs 450.00 call me tomorrow at 1800-868-0053 ask for Ron
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Status
Not open for further replies.
Top