DodgeTalk Forum banner
Status
Not open for further replies.
1 - 9 of 9 Posts

·
DA SHIZNIT
Joined
·
58 Posts
Discussion Starter · #1 ·
i am recently going to be upgrading to a E-Fan and i am trying to figure out how to get the stock clutch fan off... do i just use a pipe wrench and turn it off or wat? thanks guys.....:help:
 

·
Registered
Joined
·
3,960 Posts
You can use a spanner wrench if you have one, or like most of us who don't, stick a strong screw driver through one of the holes in the pully and wedge it against a part of the water pump and spin the fan nut off. It will be on there pretty good, and might bend the screw driver, but it should come off.
 

·
Tricked out Ram
Joined
·
12,615 Posts
Yeah, thats how I do mine. I put a screwdriver through the water pump pulley and wedge it on the pump while using a big crescent wrench pipe wrench to take off the clutch fan. Make sure you are spinning it CCW
 

·
Im wired!!!
Joined
·
2,344 Posts
my first pump i bent the shit out of the pulley, it wasnt happening. finally i torched it for a few then the parts that wernt bent i wedged someshit in it and it finally came off, wtf. At least i had a new pump on hand. They probably used locktight bottle on mine haha
 

·
Northern *******
Joined
·
325 Posts
They can be a Biotch for sure...
 

·
Im wired!!!
Joined
·
2,344 Posts
efan would be nice, along with a radiator that has a cap. Hell the more i think about it the pos shroud can go and an efan might be my next mod
 

·
Acts 2:38-39
Joined
·
2,369 Posts
I was going to say use search, but that seems to only work for a handful of folks. What I will do instead is post links to several other clutch fan removals, so you can do some browsing and see what others have put together. RubberFrog, Weedahoe, HEMI450 and stickshiftsrule did some writeups that are pretty good.
http://www.dodgetalk.com/forums/showthread.php?t=286079
http://www.dodgetalk.com/forums/showthread.php?t=161306
http://www.dodgetalk.com/forums/showthread.php?t=293550
http://www.dodgetalk.com/forums/showthread.php?t=88313
and in the DIY section: http://www.dodgetalk.com/forums/showthread.php?t=155588
 
1 - 9 of 9 Posts
Status
Not open for further replies.
Top