DodgeTalk Forum banner

Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter #1
Eleanor is my 1989 2WD D-100 318. I found the tires wearing on the outer edge pretty bad , so I started to look at the front end having just welded ball joints into brand new lower control arms. Well I jacked her up and one of the links is broken off at the lower thread, so I soaked the 27 year old nuts and backed all three out assuming I just needed a new bolt and bushings. Low and behold, the bolt is a part of the upper sway bar link bracket. I looked everywhere I could think of, but I can't even find a picture of one in Mopar diagrams that matches this thing. It is two semicircle pieces that when bolted together wrap around a 2-3" rubber bushing on the strut rod and have a stud sticking out of it which is not replaceable. Help! Note: Eleanor lives in the black mountains of North Carolina, so our roads make a roller coaster look like I-40 in West Texas. Thanks.:gr_patrio
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top