DodgeTalk Forum banner

Status
Not open for further replies.
1 - 9 of 9 Posts

·
lostsoul trapped in time
Joined
·
423 Posts
from the looks of it, that's a 4.7L D. He probably ordered the Mopar 9195 exhaust which is a split rear exhaust, but I could be wrong.
 

·
Registered
Joined
·
849 Posts
ive gotta hemi with duals just like that i had done when i had the mufflers removed mine come out with 3" and i still have the spare tire.
 

·
rangouno
Joined
·
98 Posts
I have a flowmaster dual 40 series with 4" tips and I still have my spare.
 

Attachments

·
Registered
Joined
·
724 Posts
Anybody notice any heat stress on their spares?
 

·
Registered
Joined
·
849 Posts
Not yet, I had to take it off because i had a rattle and the muffler shop kept sayin it was the spare so i took it off to see if i could get rid of the rattle and i checked the tire out and no marks or anything that i could see..
 

·
rangouno
Joined
·
98 Posts
No heat stress on my spare, and I also have a rattle which comes from the diver side pipe.
 

·
Registered
Joined
·
103 Posts
Mine is toasted a bit. There is enough room to bend around the spare so that it would not have happened. If I notoced before it was too late, I would have put a heat shield in place.
 

·
MatrixMan
Joined
·
1,073 Posts
I have duals as well with no heat stress on spare tire. It is a tight fit but no problems at all in over a year with this exhaust.
 
1 - 9 of 9 Posts
Status
Not open for further replies.
Top