DodgeTalk Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
I have a 2005 QC short bed. I want to bag the rear end to aid in loading my motorcycle up the ramp when no ditch is available to back up into. Problem is, the truck is a lease. How much cutting or major modification is needed to bag the back. Any advice would be great. THX! :help: :dunno: :confused:
 

·
Registered
Joined
·
2,023 Posts
If you got with the Air Ride Technologies kit there is no cutting or fabrication involved, straight bolt in.
 

·
HEMINATOR
Joined
·
1,131 Posts
Brian i have been trying to get a hold of you for a while. I need to know about my gear install and what you can do for me. I didnt want to call becasue i know you are busy with getting your truck back in order, so i held off. I dont want to seem to bothersome, please let me know what a good time would be to contact you about this install.. I work nights Sun-Wed, and you can call me if you like during those times, or late at night anytime during those days... Please let me know bro.. thanks. Myk
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top