DodgeTalk Forum banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
Hi All I have a shell on my truck does anyone know where to tap into the brake light power. You can't get it from the back at the lights as they are also turn signals. I found the wires in the cab for the stock third light. Thought there is a closer spot at the back of the truck. I hate to run a wire from there.


Thanks Joe
 

·
Troubleshooter
Joined
·
1,516 Posts
I think you will need to run from that wire, like you said it would be hard to tap into the tailights
 

·
Registered
Joined
·
631 Posts
yup, you will have to run from that wire under the dash. Thats what I did when I installed my topper 3rd brake light.

Good luck.
 

·
Registered
Joined
·
607 Posts
There's a loose end of wire that hangs out of the loom just behind the bumper, that should still have a little tag on it that is marked CHMSL, that's put there just for that purpose, it connects to the contact on the brake switch that doesn't go through the indicator switch. IIRC it's white with a stripe of some color.
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top