DodgeTalk Forum banner
Status
Not open for further replies.
1 - 5 of 5 Posts

· Registered
Joined
·
22 Posts
Discussion Starter · #1 ·
Where is a good place to run a couple of 18 gauge wires up to the battery in a 2000 regular cab. i have tried thru all of the grommeted holes I have found and haven't been able to push them thru.
 

· Registered
Joined
·
827 Posts
i ussually take a pick and poke a hole in the existing grommets............ussually works that way...........other wise find a safe place to drill, both inside and out........and run your wire............i ussually run some hose around the wire where it passes through the hole to protect from shorts and seal the air out.
 

· Registered
Joined
·
121 Posts
I just ran a 8 gauge wire today. The grommet on the driver side on the lower part of the fire wall worked perfect. I just poked a hole with a Phillips head and went to town.
 

· MUDDY AFFAIR
Joined
·
951 Posts
spit on it... everything will eventually fit with a little spit.
 

· Registered
Joined
·
22 Posts
Discussion Starter · #5 ·
Needless to say I ran the wires a long time ago. Thanks for the reply though.
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top