Can anybody give me good directions on how to replace the Idle control Valve on my 2007 Ram Hemi?
it was running rough for a long time at idle while cold. I did new plugs, coil, EGR, PCV, cleaned throttle body and als replaced the F'n lifters on one side (missfire Cyl 4 code). Now still dips RPM to about 200 sometimes during idle.
Should I replace the TPS too? How do I do that?
it was running rough for a long time at idle while cold. I did new plugs, coil, EGR, PCV, cleaned throttle body and als replaced the F'n lifters on one side (missfire Cyl 4 code). Now still dips RPM to about 200 sometimes during idle.
Should I replace the TPS too? How do I do that?