yes it's been done by many members

 

pm adamredlines he got a ebay kit that does that

 

I did it, then took those tubes off when I drove it in a drizzle and it almost stalled my truck out. I got home, turned the truck off and 2 cups of water dumped out of each tube. Right now I got the Y and two filters behind the SRT hood, and will probably use the tubes to go to the foglight holes at the track, but NOT FOR A DAILY DRIVER.

 

ouch that must have scared the chit out of you bro... i know i was terrified enough when i went to take my cai filter off and found it rolling around in the box... who knows how long it had been off

 

you think water sucks? I went mudding with my homebrew intake and when I took a break and opened te hood the filter was covered in mud, and some of it got through

 

Those tubes are pretty much the same as the Vararam set-up, but they are mounted in the bumper grille opening. I wonder since that opening is slightly higher than the fog light opening that it helps with water. I know a bunch of guys with them on their Hemi's and they do not have problems with water getting sucked up the tubes.

 

Mine was probably my own doing. I've got 5" drop up front, mounted it at the lowest spot, and I dont have inner fender liners up front to protect it....BUT I cant say for sure so proceed at your own risk!

 

HEMI450HP had a duel CAI on his truck a couple years ago. get with him @ See if he still has shots of it. It placed 2 air filters where the Fog lights go..

 

Found it

 

Mine was identical to his, and I've talked to him about it. My truck is alot lower than his was, and he had inner fender liners. I think those two things were what made the difference.

 

Well i decided not to do this mod. To many negative feed back plus i like to play in the mud and water to much. So i just ordered air rams jet scoop instead and powerwire instead