DodgeTalk Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
how do u check the codes, i know its something with turning the key on and off.
i have a bad shake around 1800 RPM when i give it the power everything shakes very bad. when im in like 4th speed it seems like it worse. i hope its not my tranny or a torque convertor. i have 135,000 miles on it. also when im driving my truck up on the top where outside temp is every now and again there is a "Ccd" that shows up there. Does anyone know what it means.
 

·
Registered
Joined
·
2,446 Posts
On the 2000 and newer, turn the keyswitch On-Off-On-Off-On then look at your odometer.
On the 1999 and older, you'll need to get it scanned.
Most chain type auto parts stores will scan for free in hopes you'll buy parts from them....kind of a cool trade.

I'll do some checking on the CCD on your overhead display.
 

·
Registered
Joined
·
5 Posts
Discussion Starter #3
well i got three codes. I have no idea what they mean bad or good, well must not be good if there codes. Well anyways the codes are

1682
1623
0382

thanks for the help
 

·
02 R/T & 05 Ram
Joined
·
2,725 Posts
well i got three codes. I have no idea what they mean bad or good, well must not be good if there codes. Well anyways the codes are

1682
1623
0382

thanks for the help
answered your question in the other thread
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top