DodgeTalk Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter · #1 ·
going to be replacing the plugs and wires and possibly coil pack too on my 2000 neon.... looking for suggestions.... (looking for performance)
 

·
Registered
Joined
·
215 Posts
If you're looking for performance, try out the Denso or NGK iridiums. There's a DYNO test result on our site for Denso's iridiums from Muscle mag - http://sparkplugs.com/pdfs/muscle.pdf.

here's the pt#s for your vehicle:

Denso pt# IQ20
NGK IX iridium # BKR6EIX
NGK double platinum # PFR6G

NGK wire # ME83
 

·
Registered
Joined
·
493 Posts
LOL, Mustangs...

And I can show you 20+ dynoes of Neons just like yours with absolutely no difference whatsoever. The best we've ever seen for a performance increase is on Chris Barnett's 250+ HP turbo car, and that was just over 1 HP by gapping regular copper plugs to 0.040". Didn't do a thing for my car (132 WHP)...

If plugs and wires are improving your cars performance, there was something worin with the ones you replaced. The most reliable plugs we've found are Bosch and NGK copper plugs. Platinum plugs reduced performance/driveability (ET's) and fuel economy without fail.

Word of advice - never trust "research" done by a vendor...

Best of luck!
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top