DodgeTalk Forum banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
I have a 98 Ram 1500 4x4, 5.9L auto trans, 92K miles. I installed a new Mopar Dist cap, rotor and plug wires and new autolite (not platinum) plugs. and now have a miss. It is throwing P0308 (8the cyclinder misfire) put in another new plug and put the old wire back on and still have a miss with P0308 code. Any ideas, Coil? What next.... Thank you, James
 

·
Registered
Joined
·
6 Posts
Discussion Starter #3
put the old wires back on, bought another new plug and replaced for cylinder 8, still has a miss. Does not miss when there is a load on the motor, just misses when you let up on the gas, like when you come over the crest of a hill or just coasting. Noticable at 45-75 mph. What next.
 

·
Registered
Joined
·
994 Posts
make sure your wires are routed according to the TSB
 

·
Registered
Joined
·
6 Posts
Discussion Starter #5
where do i finding the routing for the plug wires according to the TSB....i have looked but cannot find it.
 

·
Registered
Joined
·
994 Posts
1 - 6 of 6 Posts
Status
Not open for further replies.
Top