DodgeTalk Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
13 Posts
Discussion Starter · #1 ·
I have an '04 qc 2wd hemi at stock ride heights. It has the stock 17 inch wheels on it currently. The wheels I'm looking at are 20x10's and haven't seen a backspace measurement on them. I'm looking to put "street" tires on it, not offroads, and don't want the tires/rims sticking very far at all outside of the wheel well. A little is ok, but would like to keep it to a minimum. What size tire is appropriate for a 20x10 wheel and will fit without rubbing anything lock to lock, if at all? I am, in the near future, going to be installing drop shackles to level the truck. Don't want to go up on the front end.

Any help is greatly appreciated!
 

·
You've been Hijacked
Joined
·
14,749 Posts
a 305mm or 12.5" wide tire is a good match for a 10" wide wheel. Without the offset or the backspacing we can't tell you if they will stick out or not.
 

·
Registered
Joined
·
13 Posts
Discussion Starter · #3 ·
Thanks for the response. I'll try to find those specs. Didn't see them on the site selling the wheels I want.
 
1 - 4 of 4 Posts
Top