DodgeTalk Forum banner

Status
Not open for further replies.
1 - 1 of 1 Posts

·
NDGO88
Joined
·
23 Posts
Discussion Starter #1
Guys, I have warped rotors on the front of my 04 1500QC. I read the thread about caliper removal etc. My problems lies with the caliper adapter bolts. I used every penetrating oil I could find no luck. Both bolts are in the rear of the rotor and very hard getting leverage on them. Any suggestions would be appreciated!
Now the second problem is vibration between 52 mph and 65 mph. It feels like the front and rear. Almost like a tire out of balance. I had new Discover HT Plus placed on the front almost exactly 10k miles ago. I am certain the shop did not torque to specifications. Any input on this would be greatly appreciated!

"G":rolleyes:
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top