Nice! How much did that setup run you?
- Status
1 - 20 of 171 Posts
more
Attachments
If you use the cathodes on the exterior of your truck you MUST silicone up the connections and tube ends and the transformer. Then wrap the tranformer in electrical tape. And you will be waterproof.
On the inside this step is not nesassary.
these do not draw hardly any wattage at all! you can run them for hors and wont kill a decent battery.
they are a 12V hookup so you need a possitive switched source and a ground,
I zip tied all my tubes to existing brackets under the front seats.
I cant get decent pictures of my under seats right now as its dark wil lget them tomorrow. I also suggest using there switches here is the one I got from them!!
On the inside this step is not nesassary.
these do not draw hardly any wattage at all! you can run them for hors and wont kill a decent battery.
they are a 12V hookup so you need a possitive switched source and a ground,
I zip tied all my tubes to existing brackets under the front seats.
I cant get decent pictures of my under seats right now as its dark wil lget them tomorrow. I also suggest using there switches here is the one I got from them!!
Attachments
1 - 20 of 171 Posts
- Status
