DodgeTalk Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
43 Posts
Discussion Starter · #1 ·
Does anyone know if the mopar purple cam and lifter combo is the best deal in terms of power gain for the $ - I recently became aware that my lifters need replacing and I figured I may as well do the cam too. Also typically does anything else in the valvetrain need to be changed? or does the computer need to be modified?
 

·
Registered
Joined
·
362 Posts
I'm pretty sure that is a flat tappet cam for use in LA engines. Mopar does have a set HP of lifters that a lot of people use. As far as a cam I would look toward either KRC or Socal dakota.

Depending on the cam you will need either custom pushrods or adjustable rockers and a set of springs for the cam lift. A large cam will need some sort of computer mod.
 

·
Registered
Joined
·
43 Posts
Discussion Starter · #3 ·
Im assuming the company making the cam will list the other recommended modifications.
 

·
Registered
Joined
·
362 Posts
Sorry didn't think about that. KRC does list what else is needed. Socal Dakota Doesn't but you can use the KRC as a guideline.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top