DodgeTalk Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I have a 02 Ram with the 3.9, my first problem is my passenger headlamp is filling with water and I was wondering if anyone knows an easy way to remove it. I am also noticing a slight tick sound from under the hood, could this be just an exhaust leak? Thanks for any info. JR
 

·
Registered
Joined
·
23,005 Posts
An easy way to remove the water or the lamp? You can take the whole light assembly off the truck using a 10mm socket and a long thin extender. That and a few plastic screws once you pop the hood.

After doing that you can try and pour the water out I guess. Then I would seal it with some black rtv silicone along the edges. Or you can go to the interior/exterior forum and read the how to on clearing headlights. :) Will explain how to remove the headlamp and take it apart. Might be best way to dry up the water and then you reseal with rtv.

KB
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Status
Not open for further replies.
Top