DodgeTalk Forum banner
Status
Not open for further replies.
1 - 8 of 8 Posts

·
Registered
Joined
·
150 Posts
Discussion Starter · #1 ·
I want to get a 2/4 lowering kit this summer, probably eibach springs, hangers and shackles, along with belltech spindles. Is it necessary to get shocks? I recently got new monroe shocks and I'm not sure if they will compress completely and have no affect on the ride or will they work fine? Any help on this would be appreciated!
 

·
hot2k1ram
Joined
·
756 Posts
the nitro drops from belltech are nice shocks to have when you lower ur truck
and the toxic shocks for lowered vehicles are nice too
 

·
Registered
Joined
·
38 Posts
If all you are using up front is spindles, then your front shocks should be OK. Rears will need to be changed to ensure you get full shock travel without breaking parts.
 

·
hot2k1ram
Joined
·
756 Posts
i did a 2/4 on my '01 and it rides rough, did u cut your bump stops or something?
 

·
GROUNDED
Joined
·
2,944 Posts
when i installed my drop i removed the entire bump stop tower and made the spring pocket all level and this helped me out when i bagged it because i had less cutting to do.
 

·
hot2k1ram
Joined
·
756 Posts
i kno on older models the bump stop and that round piece around it can just be unbolted but on my truck it's all one piece so i may have to get in there with the torch and cut it all off and make my own bump stop for now
 
1 - 8 of 8 Posts
Status
Not open for further replies.
Top