DodgeTalk Forum banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
589 Posts
Discussion Starter #1
Looking for two people here.
The guy who cut the floor of his quadcab to stuf a box in there
The guy who raised his seats to get 2 12's under the seats

im thinking about putting two Rockford fosgate 12" p3's and two matching osgate amps. I have two powerbass 10's but they just dont cut it. I want something that will make the block shake haha.

A few questions for the two guys. How much airspace did you end up with.
Was it worth the extra work you put in.
Do you get that shake the block feel and is it considerable louder than two 10's

Thanks
Batman
 

·
Registered
Joined
·
251 Posts
I just got done putting 2 10" eclipse subs in a Joe Fox box under the seat and it came with spacers to raise the seat.

sorry about the pic quality it was dark and the truck is a mess.

 

·
Registered
Joined
·
251 Posts
oh and as far as the rockford amps...

With the P3's ytou might be able to get away with what I did.

I bought a rockford p10002 amp. which is a 2 channel 1000 watt amp.

The amp card that came with it said it has about 1200 watts. So I wired the subs parallel so I have about 600 watts at 2 ohms going to each sub. Obviously I have to turn down the amp but you get my point. You'll probably only need one amp to make the neighborhood shake.
 

·
Registered
Joined
·
589 Posts
Discussion Starter #4
Thanks cam. I might just skip the rockford subs and get the amps from rockford,.

Anybody know the guys im looking for? I wat to know how much space they got from those mods.
Thanks
Batman
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top