DodgeTalk Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

· Registered
Joined
·
1,357 Posts
Discussion Starter · #1 ·
Ok i got the whole assembly out with the air vents and everything....now it looks like the stock bezel is riveted on???? do i just drill out the rivets if so how the hell do i put the aluminum one back on???

THanks in advance
 

· Registered
Joined
·
3,024 Posts

· C HEMI GO
Joined
·
1,996 Posts
If you don't want to scroll, you can either drill or use a soldering iron. I've also heard of using a soldering iron to heat a spoon. I drilled the rivets enough that the bezel came off. Their should be enough material if you want to put it back on but generally once you take it off, it's off for good.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top