DodgeTalk Forum banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
284 Posts
Discussion Starter · #1 ·
Hey guys well not long ago when I lifted my truck I came across the problem that when I turned "pretty hard" (not even full lock) my tires were pushing my sway bar end links into my spring for my suspension. I can flip the sway bar upside down and get long endlinks and I think it would work fine.. does anyone know where I could get something like this?

Or is there an aftermarket sway bar for a problem like this to help cure it?

Any and all information is appreciated guys!!

Will not having a sway bar cause my tires to wear faster? I sure as HELL dont need that happeneing!!

:help: :help:
 

·
Registered
Joined
·
10,359 Posts
Your tires wont wear any faster at all,and I have seen a company that makes different length sway bar end links,I just need to find it again.

I actually did some lite grinding on my spindles before I took my kit off and sold it, I didnt have any more issues once the small area was ground down some where the contact was made. This little ground area solved the whole problem.
 

·
Registered
Joined
·
284 Posts
Discussion Starter · #3 ·
Humm... I'll try that... will it not weaken the spindle any?
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top