[4xfreak]

Pics aren't the best but I did this after work this evening. Painted the trim for the window/lock controls, trim around locks itself, and door handles all silver. If you'll notice there is one hole drilled in the door handle. Couldn't decide whether or not to do the whole thing yet.

 

[4xfreak]

Why not get a sharpie to fill the hole? Get the idea of what it'd look like then.

Good idea Bubba. I'll try that in a few days..

 

[4xfreak]

Very nice.

I did the same a while back:

How does the radio/ac controls surround and the pieces around the cruise control come off?

 

[4xfreak]

The bezel around the radio is pretty easy. There is one screw located in the "trash bag" hook. Then just pull evenly around the edges, pops right off. The pieces around the cruise control buttons are a pain in the ass. There are two screws (torx I believe) that need to be removed from the back side of the steering wheel. then the plastic cover comes off the center. After that, you need to remove the airbag, in which youll find two more screws that hold each of the cruise control button covers on.

I know how to remove the entire radio bezel, i'm talking about the piece that you have painted silver. Does it seperate from the big piece?

 

[4xfreak]

Okay, here is the link to my write up. Its pretty easy, don't be skerred. I used a soldering iron instead of the hot spoon after all though.

http://www.dodgetalk.com/forums/showpost.php?p=395840&postcount=138

KB

Thanks for the link. I'll see if I can give it a try.

 

[4xfreak]

I used Duplicolors Metallic Silver.

Me too.