DodgeTalk Forum banner
  • Enter for your chance to win a $50 Amazon Giftcard! HERE.
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
607 Posts
Easiest way to tell is to look at the label either stuck on the underside of the hood or the radiator support (or some are inside the glovebox) that details the original build. There should also be a tag under one of the diff cover bolts with the ratio on. To see if it's been changed you could always do the old trick, chalk a mark on the prop shaft, jack one wheel up, turn it two times and count the number of rotations of the prop.
I don't think there's anything in the vin you can decode, but you should be able to get a build sheet from a dealer.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top