DodgeTalk Forum banner

Status
Not open for further replies.
1 - 9 of 9 Posts

·
Registered
Joined
·
45 Posts
Discussion Starter #1
How do you tell R/T heads from stock 360 magnum heads other than valve size? Are they the same on 5.2's? Are they marked somewhere? Are they worth the money? I have a k&n fipk, hypertech, JBA headers, Holley 52mm, catback, and 180 t'stat. I was thinking about dropping in a cam and roller rockers if I do the heads. :rck:
 

·
Registered
Joined
·
98 Posts
The R/T heads have larger more free flowing ports, beefier and don't crack like the stockers do. Being in a cold climate I prefer them over the Edelbrocks too.
 

·
I'd rather be riding...
Joined
·
613 Posts
Dealer item only or can you buy them online from Summit or the like?
 

·
Registered
Joined
·
98 Posts
You can buy the R/T's from Summit or completely setup from places like KRC Performance.
 

·
Registered
Joined
·
45 Posts
Discussion Starter #7
Are the stock Dakota R/T heads stamped as well

Are the factory 2000 Dakota R/T heads stamped with the R/T logo as well or are just the aftermarket.
 

·
Dakota for life!
Joined
·
823 Posts
Just the aftermarket heads have the raised r/t logo.
 

·
Registered
Joined
·
98 Posts
Yes the R/T heads are stricktly aftermarket. They were never used in a production vehicle. Its confusing since they use the name R/T in other places. People normally assume the Dakota R/T had the R/T heads, nope.
 
1 - 9 of 9 Posts
Status
Not open for further replies.
Top