DodgeTalk Forum banner
Status
Not open for further replies.
1 - 7 of 7 Posts

· Kasey Kahne #9
Joined
·
9,310 Posts
buy the kit that comes w/ the cleaner and oil...

do not air blow it.. it will spread the fiber apart..
 

· Registered
Joined
·
3,907 Posts
jdosuna said:
I bought a K&N air filter. I am not sure what is the best way to clean it. Do you wash it with water, air blow it, or use some type of solvent?

:dunno:
It's a pretty straight-forward cleaning. Rinse with low pressure water from the clean side to the dirty side. Allow it to air dry. Spray it with K&N Oil lightly over the surface. Put it back in the air box.
 

· Hemi2nV
Joined
·
7,957 Posts
i really need to clean my AEM filter...could be loosing a few ponies there
 

· Registered
Joined
·
362 Posts
sandiegohemi said:
It's a pretty straight-forward cleaning. Rinse with low pressure water from the clean side to the dirty side. Allow it to air dry. Spray it with K&N Oil lightly over the surface. Put it back in the air box.

Just be careful not to OVEROIL the filter. Too much oil is just as bad as not enough! ;)
 

· Registered
Joined
·
2,786 Posts
Yep K & N sells a recharger kit....hose it inside out..let it dry..then spray on some oil....
 
1 - 7 of 7 Posts
Status
Not open for further replies.
Top