DodgeTalk Forum banner
Status
Not open for further replies.
1 - 4 of 4 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Dodge,Intrepid/2000

The light bulb on the dash that backlights the left side of the instrument cluster (lights up the gas gauge) is out. I was told I needed to remove the plastic bezel around the cluster, and gain access to it that way.

Has anyone faced this before?

I found 2 screws after removing the fusebox cover and was able to loose one side, but not much flexibility after that. I'm trying to avoid dismantling too much, and any input would be very much appreciated.

Looking forward to hearing from someone.

Thank you.
*
Dave S.
 

· Registered
Joined
·
179 Posts
Take off the fuse cover on the left side. Remove three the three screws. On the steering wheel use a flathead screw driver to remove the cover. Under the steering wheel grad and pull towards/down the pannel. Remove the right top screw. Pull from the fuew box area the main panel. The rest you're on your own and there might be a few more screws. Kinda hard to remember from memory.
 

· Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
Intrepid bezel removal...THANKS!

Good morning, TCPMeta,

Thank you for the input. It represents progress, and is appreciated. I'll update the thread as I move along.

Thank you, again, for your time and help.

Regards,
*
Dave :=)
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top