DodgeTalk Forum banner
1 - 4 of 4 Posts

·
Registered
2005 Grand Caravan 3.3
Joined
·
20 Posts
Discussion Starter · #1 ·
I got the little red tab out, I can't get connector loose. It's that big one below the throttle body.
Automotive tire Motor vehicle Automotive lighting Automotive design Automotive exhaust


Hood Motor vehicle Automotive tire Automotive exterior Bumper

Any suggestions on how to get it loose?
 

·
Registered
2005 Grand Caravan 3.3
Joined
·
20 Posts
Discussion Starter · #4 ·
Thanks, I'll try that. I did try pressing that spot in the back, I couldn't detect any movement at all when I pressed, it just felt like a solid piece of plastic, it didn't push in at all. But I have help today, my SIL has stronger hands than me, so maybe he can get it loose. I'll let you know how it goes!
 

·
Registered
2005 Grand Caravan 3.3
Joined
·
20 Posts
Discussion Starter · #5 ·
Got it loose! My Son-in-law was here for a bit, his hands are a lot stronger than mine. He got it loose, but it wasn't easy for him either. Apparently that connector is just really tight. I think I'll clean it and apply a thin coat of silicone spray before I reconnect it. Just in case I ever have occasional to take it apart again.

Now I can finish what I'm doing. I'm replacing the intake manifold gasket, and a few other things, while I have it apart.
 
1 - 4 of 4 Posts
Top