DodgeTalk Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
My 2005 SXT blower is only working on the speed 3 setting. I checked all the fuses/diodes, and changed the resistor with no improvement. What else should I be looking at?

Many thx,
D
 

·
Registered
Joined
·
4 Posts
Discussion Starter #2 (Edited)
Okay, put a new blower switch in the dash of my 2005 SXT 3.5 Magnum, and now all the blower speeds work correctly, But I'm not getting any heat. I bled the cooling system, and still no heat. Both the entry, and exit heater hoses on the firewall are hot, so I'm guessing heater core flow is good. What the next thing I should be looking at?

thx,
D
 

·
Registered
Joined
·
4 Posts
Discussion Starter #3
Does anyone know if all the driver's front door wire harnesses are the same for all Magnums, 2005 through 2008?

thx,
D
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top