DodgeTalk Forum banner
Status
Not open for further replies.
1 - 20 of 42 Posts

· Registered MOPAR User
Joined
·
9,389 Posts
Discussion Starter · #1 ·
Finally got to install my spindle and spacer lift on front and rear lift shackles. also new 2500 shocks all around.
Here some b4 and after pics of the passenger side, driverside already done. I went quite easily, The major problem for most would be the BJ's and tie rod ends. W/ a clamp and a couple sockets and a whack of the hammer they let loose.


I'll be doing a small write up unless some one knows of a write up already. Got it done from start to finish with rear lift and 4 shocks in 5.5 hours. Then an alignment afterwards.
 

Attachments

· Registered MOPAR User
Joined
·
9,389 Posts
Discussion Starter · #2 ·
The sun didn't do justice. Kit was Slammed1 3" spindle and the daystar 2.5" coil. Rear 2" shackles. Monroe reflex shocks.
 

Attachments

· Registered
Joined
·
5,505 Posts
Looks great.
 

· Registered MOPAR User
Joined
·
9,389 Posts
Discussion Starter · #4 ·
1st pic second post is the lift on front only, rear did not have shackles installed yet,

Thanks KRS
 

· 1 TIM 6:12 Fight RIGHT!!
Joined
·
2,209 Posts
Looks GREAT, now ya need BIGGER tires and for heaven's sake, loose or get the topper painted white! J/K :D
I guess I'm not used to seeing the longbed QC's
 

· Registered
Joined
·
542 Posts
dizzyD said:
Finally got to install my spindle and spacer lift on front and rear lift shackles. also new 2500 shocks all around.
Here some b4 and after pics of the passenger side, driverside already done. I went quite easily, The major problem for most would be the BJ's and tie rod ends. W/ a clamp and a couple sockets and a whack of the hammer they let loose.


I'll be doing a small write up unless some one knows of a write up already. Got it done from start to finish with rear lift and 4 shocks in 5.5 hours. Then an alignment afterwards.

See now... You've got me wanting to do that to mine!

I do alright most of the time, but I've been getting stuck
in the ruts left by dump trucks at some of the job sites
I have to go to.

I already have the 2 1/2 spacers in front, but I already
bought new Bilsteins all around and now I'm going to
have to replace them if I do this.... Thanks a lot! :eek:
 

· Infinite Lives
Joined
·
6,428 Posts
Looks good :) I agree bigger meaty tires will make it look ALOT better :)
 

· Registered
Joined
·
5,505 Posts
Wheres the comparison pics of our trucks? :rck:
 

· Infinite Lives
Joined
·
6,428 Posts
Kris who sits taller?
 

· Registered
Joined
·
5,505 Posts
CRMRAM said:
Kris who sits taller?
He almost sits as tall as I am now. Once he gets rid of the 245/70/17s he will be higher.
 

· Infinite Lives
Joined
·
6,428 Posts
Got any measurements?
 

· Registered
Joined
·
5,505 Posts
He is at 40" in the front and I'm at 42.5"
 

· Registered
Joined
·
338 Posts
looks good...i prefer to go in the opposite direction (towards the earth) but still looks good!
 

· Registered MOPAR User
Joined
·
9,389 Posts
Discussion Starter · #14 ·
Yeah, Tires will be a future change.
Sorry KRS, haven't done the download yet, SOON.
 

· Registered
Joined
·
5,505 Posts
Its cool Brian.
 

· Raming it since 2004
Joined
·
102 Posts
Good looking truck dude.
 

· Registered MOPAR User
Joined
·
9,389 Posts
Discussion Starter · #17 ·
Here you go, Me and KRS face to face.
(So need tires!)
 

Attachments

· Infinite Lives
Joined
·
6,428 Posts
I see how it is......... You guys install a mod and not even invite me......... :bawl: :bawl:
 

· Registered
Joined
·
5,505 Posts
CRMRAM said:
I see how it is......... You guys install a mod and not even invite me......... :bawl: :bawl:
lol... I had to work today, I just came on by afterwards to see the final result.
 

· Registered MOPAR User
Joined
·
9,389 Posts
Discussion Starter · #20 ·
I can invite you over for the MIT install!
 
1 - 20 of 42 Posts
Status
Not open for further replies.
Top