DodgeTalk Forum banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Registered
Joined
·
26 Posts
Discussion Starter · #1 ·
ok, i have my grade 8 bolts, 10,000 hooks and drill in hand. Were should i put them.

i ask because every time i do something i get 30 ppl telling i should have {insert direction here} :D

i was thinking of that cross member in the very front of the truck between the frame rails, i have allready removed the air dam. since this cross member looks reinforced from the top. but i like to see what gang has to say :dtrocks:
 

·
Registered
Joined
·
54 Posts
i just did this, but went a different route. i bought the mopar tow hooks and brackets that wrap around the frame and the front cross member. they are expensive new (115-120). I bought a used set on ebay for 70 plus 10 shipping. (somebody else wanted them too). I was afraid the cross member was not strong enough to pull on. The frame is sort of odd shaped, and has no good place to bolt the hooks on.

if this link doesn't work, search on mopar tow hooks
http://cgi.ebay.com/ebaymotors/Dodg...005QQitemZ150042027838QQrdZ1QQsspagenameZWDVW
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top