DodgeTalk Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
50 Posts
Discussion Starter · #1 ·
I want to replace the ball Joints on my 2003 quad cab 1500 hemi ram 4x4.

Is the upper and lower joints replaceable with press in joints?

Can I buy them without the control arms like some other dodges?

Does anyone have a picture of the upper joints?

What else do I need to replace, truck has 105,000 road miles and does not were tires.

Remember this is a 1500 Hemi Ram 4x4 with 315/17/70 on it with no lift.

how are the uppers and lowers held into the control arm, I seen pictures with a snap ring. Are they pressed in?
thanks
 

·
"Cone Killer"
Joined
·
2,441 Posts
Lowers you should be able to press in, uppers on the other hand, you have to replace the entire arm, luckly Moog uppers are fairly inexpensive.
 

·
Once and future owner
Joined
·
3,059 Posts
X2. The upper A-arms and ball joints are one whole assembly that needs to be replaced. Moog has steel replacements with greasable upper ball joints. They also have greasable lower ball joints and those need to be pressed in. Good luck.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top