DodgeTalk Forum banner

Status
Not open for further replies.
1 - 8 of 8 Posts

·
Registered
Joined
·
57 Posts
Discussion Starter #1
Hey Guys, my wife rearended someone a couple weeks ago and after taking off the bumper cover and cushion I realized the reinforcement piece is bent. Any ideas where i could find a cheap replacement. I searched online and checked out the sponsors sites already. Just looking for the cheapest option.
Thanks for any help.

Kyle
 

·
Registered
Joined
·
849 Posts
Make sure you replace it with oem parts, I had to replace the bumper cover, the plastic piece behind it and the actual bumper, i used aftermarket and they didnt fit for crap, the metal bumper has 4 bolts welded on it but on the after market on i got only had 3 on each side then the bolts that are welded on didnt go into the holes on the durango so i had to mess with it for a while to get it on, i think it took me 2 1/2 hours to replace it all. I would go with dodge parts unless you want a big headache....Just my .02cents
 

·
Registered
Joined
·
57 Posts
Discussion Starter #5
Thanks, i already ordered OEM from Makeitmopar.com. Hopefully it will be an easy fix. THere was no damage to the cushion or cover piece.
 

·
Registered
Joined
·
1 Posts
Is that listed as the "reinforcement" on MakeitMopar or Dodgeparts dot com?
List price $157, "your price" $117?
Thanks.
S.
 

·
Registered
Joined
·
57 Posts
Discussion Starter #7
Snorman, that is correct.
 
1 - 8 of 8 Posts
Status
Not open for further replies.
Top