DodgeTalk Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
476 Posts
Discussion Starter #1
For some reason, the passenger side tail pipe on my flowmaster kit has worked its way out of the muffler outlet twice now since the kit was installed. The kit came with clamps for the pipes that wrap around the pipe and are held in place by one bolt. I don't understand this at all, since the tech who put it in, used an air ratchet which should have been strong enough to tighten it properly. I know that flowmaster says weld all slip fit connections, but that is not an option for me. Any ideas would be appreciated :help:
 

·
Yea, It's a Hemi
Joined
·
6,865 Posts
just go to a muffler shop and have it welded for a couple dollars.. .maybe even free if they are nice.
 

·
Valdez Racing Team
Joined
·
13,913 Posts
...do you plan on removing it? is that why you don't want it welded?
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top