DodgeTalk Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
The engine gave out on my 96 dodge2500 5.9v8 and I had a shop put a 98 engine in the trucks were the same truck just different years this has been going on for 5 months now and the shop is telling me now that it starts but has no oil pressure and that it needs a ECM and that the oil pressure is controlled by the ECM but I thought the oil pump is mechanical pump everything worked fine with the old engine always had 60 pounds of oil pressure could the problem be the sending unit or the pump or the ECM
 
1 - 1 of 1 Posts
Top