DodgeTalk Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
99 Posts
Discussion Starter · #1 ·
Has anyone purchased replacement end links for our trucks? The sway bar is not like a standard 2500. On a regular truck the end links go straight into the swaybar, but on our trucks they go in at a right angle. I called Kore and Thuren and they both wanted me to measure the diameter of the hole in the sway bar. I haven't had the time, I work too much. Has anybody bought any? If so, where?
 

·
Registered
Joined
·
135 Posts
Here is a little info I hope its help full.

Dodge part number 5139522aa MSRP price $242 online price $174.

I’m not sure why you would want to upgrade. I’m running a 3 inch lift and I removed the sway bar a year ago and haven’t had any problems. I don’t think a stronger end link would help. On second thought if you need a longer end link because you’ve lifted the PW I would suggest the Lorenz end links and replacing the bolt by purchase the right/left angle joints from FK bearings.

Top Picture is of PW end link
Bottom pic is of the Lorenz links
 

Attachments

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top