DodgeTalk Forum banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
139 Posts
Discussion Starter #1
light is on and staying on . it started out to where i could push the lever down and release it and light would go off. after a couple of times of trying.

the truck did not have any hang up on the brakes until today.I can tell it is effecting the back breaks now with drag.

I am going to change the brake fluid and back breaks. when I am in there as I have read I pull off the rotor and the E brake adjustment arm is behind the rotor .

Never messed with one before . any tips some one have to offer ? I checked on here for past info and have found none.

2004 ram 1500 4x4 hemi quad cab
 

·
Registered
Joined
·
139 Posts
Discussion Starter #2
well changed the back breaks and fluid. nothing there. called a mechanic he said pull the release lever and pull up on the foot lever. light went off. turns out it is the foot lever spring from what I understand.
 

·
Im wired!!!
Joined
·
2,344 Posts
Exactly!!! If you have a tow hitch, them wires will short and play games with all kinds of pcm, trans, and overall performace:)
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top